O2 Monitor – Model M60


The Model M60 is designed to monitor PPM and percent level O2concentrations in natural gas applications. An electro-chemical O2sensor is incorporated into the design of the instrument. The M60 can be included as an additional measurement with other Envent analyzers, or can be offered as a stand-alone analyzer with an integrated sample conditioning system.

Features

  • Electro-chemical sensor
  • Dual alarm outputs
  • Low power consumption
  • Two Line LCD Display
  • 4 to 20 mA output
  • RS-232 and RS-485 configurable Modbus communications

Specifications:
Enclosure Class 1, Div 1 Groups C&D
Operating Principle Electro-chemical sensor
Power 12-24 VDC Standard
120/240 VAC optional.
Measurement Range 0-2000 ppm to 0-25%
Repeatability 2% of full scale (%) 5% of full scale (ppm)
Warm Up Less than 10 minutes
Operating Temperature 10-50˚C (50 to 122 F)
Analog Output Isolated 4-20 mA
Communications Configurable Modbus RTU.
Alarm Outputs 2 solid state driver, 3 Amps max.
Optional Sample System Inlet filter, pressure regulator, flow meter, calibration port.
Accuracy 2% of full scale.

Applications:

Oxygen in natural gas gathering pipelines sometimes need to be monitored to ensure streams do not exceed maximum allowed concentrations of oxygen. Common ranges are from 0 to 2,000 ppm and 0 to 25%. Vapour recovery systems where inlet compression pressures are sub-atmospheric, are susceptible to air infiltration and oxygen concentration monitoring serves as an early warning. Storage tank blanket gas and other head space applications frequently require oxygen monitoring for safety reasons.


Downloads: