- Highest accuracy: ±0,5% across full flow rate range
- Calibration traceable to the German National Primary Standard (PTB)
- Measurement of all gases and gas mixtures with equal accuracy
- Use with extremely corrosive and inert gases
- Lowest measurable flow rates
- Largest selection of measuring ranges
- Real time data acquisition option for PC (requires option »Pulse Generator«)
- Most durable construction – available, both chemically (from high-quality thermoplastics) and mechanically (stainless steel)
- Maintenance-free (just checking of packing liquid level required)
Performance Specifications
Type | Flow Rate | Flow Rate | Flow Rate | Readout Indication | Readout Indication | Measuring | Pressure Loss |
---|---|---|---|---|---|---|---|
TG 0.5 | 1 | 60 | 50 | 0.002 | 9,999,999.9 | 0.5 | 0.4 |
TG 1 | 2 | 120 | 100 | 0.01 | 99,999,999 | 1.0 | 0.2 |
TG 3 | 6 | 360 | 300 | 0.02 | 99,999,999 | 3.0 | 0.2 |
TG 5 | 10 | 600 | 500 | 0.02 | 99,999,999 | 5.0 | 0.2 |
TG 10 | 20 | 1,200 | 1,000 | 0.1 | 99,999,999 | 10.0 | 0.1 |
TG 20 | 40 | 4,000 | 3,200 | 0.2 | 999,999,990 | 20.0 | 0.1 |
TG 25 | 50 | 7,000 | 5,000 | 0.1 | 999,999,990 | 25.0 | 0.1 |
TG 50 | 100 | 18,000 | 10,000 | 0.5 | 999,999,990 | 50.0 | 0.1 |
(1) The calibration is performed at standard flow and 20 °C (68 °F)
(2) Minimum dial division
The maximum gas inlet overpressure is dependent on the gas meter type and casing material:
With plastic casings TG05 – TG5: 50 mbar and 500 mbar
With plastic casings TG10 – TG50: 50 mbar
With stainless steel casings: 0.5 to 40 bar
Measuring accuracy: ± 0.2% at standard flow rate (exact value is stated in individual Calibration Certificate) and approx. ± 0.5% across the entire measuring range.
Available Models (Materials)
Material Number | Casing Material | Measuring Drum Material |
---|---|---|
01 | Stainless steel | PVC-grey |
02 | Stainless steel | PE-el |
03 | Stainless steel | PP-grey |
04 | Stainless steel | PVDF |
05 | PVC-transparent | PVC-grey |
06 | PP-grey | PP-grey |
07 | PVDF | PVDF |
08 | PE-el | PE-el |
Legend | ||
---|---|---|
PE-el | = | Polyethylene-electrically conductive |
PP | = | Polypropylene |
PVC | = | Polyvinyl chloride |
PVDF | = | Polyvinylidene fluoride |
Stainless steel | = | 1.4571 |
Viton | = | Fluorine rubber |
For chemical resistance properties please contact your RITTER distribution partner.